<feed xmlns='http://www.w3.org/2005/Atom'>
<title>mirrors/foot.git/terminal.h, branch 1.25.0</title>
<subtitle>A fast, lightweight and minimalistic Wayland terminal emulator</subtitle>
<id>https://git.0x0f.dev/mirrors/foot.git/atom?h=1.25.0</id>
<link rel='self' href='https://git.0x0f.dev/mirrors/foot.git/atom?h=1.25.0'/>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/'/>
<updated>2025-10-10T08:23:17Z</updated>
<entry>
<title>render: when double-buffering, pre-apply previous frame's damage early</title>
<updated>2025-10-10T08:23:17Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-10-05T08:48:36Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=299186a6547f6e038ee6f3822caf9a0fdfabceef'/>
<id>urn:sha1:299186a6547f6e038ee6f3822caf9a0fdfabceef</id>
<content type='text'>
Foot likes it when compositor releases buffer immediately, as that
means we only have to re-render the cells that have changed since the
last frame.

For various reasons, not all compositors do this. In this case, foot
is typically forced to switch between two buffers, i.e. double-buffer.

In this case, each frame starts with copying over the damage from the
previous frame, to the new frame. Then we start rendering the updated
cells.

Bringing over the previous frame's damage can be slow, if the changed
area was large (e.g. when scrolling one or a few lines, or on full
screen updates). It's also done single-threaded. Thus it not only
slows down frame rendering, but pauses everything else (i.e. input
processing). All in all, it reduces performance and increases input
latency.

But we don't have to wait until it's time to render a frame to copy
over the previous frame's damage. We can do that as soon as the
compositor has released the buffer (for the frame _before_ the
previous frame). And we can do this in a thread.

This frees up foot to continue processing input, and reduces frame
rendering time since we can now start rendering the modified cells
immediately, without first doing a large memcpy(3).

In worst case scenarios (or perhaps we should consider them best case
scenarios...), I've seen up to a 10x performance increase in frame
rendering times (this obviously does *not* include the time it takes
to copy over the previous frame's damage, since that doesn't affect
neither input processing nor frame rendering).

Implemented by adding a callback mechanism to the shm abstraction
layer. Use it for the grid buffers, and kick off a thread that copies
the previous frame's damage, and resets the buffers age to 0 (so that
foot understands it can start render to it immediately when it later
needs to render a frame).

Since we have certain way of knowing if a compositor releases buffers
immediately or not, use a bit of heuristics; if we see 10 consecutive
non-immediate releases (that is, we reset the counter as soon as we do
see an immediate release), this new "pre-apply damage" logic is
enabled. It can be force-disabled with tweak.pre-apply-damage=no.

We also need to take care to wait for the thread before resetting the
render's "last_buf" pointer (or we'll SEGFAULT in the thread...).

We must also ensure we wait for the thread to finish before we start
rendering a new frame. Under normal circumstances, the wait time is
always 0, the thread has almost always finished long before we need to
render the next frame. But it _can_ happen.

Closes #2188
</content>
</entry>
<entry>
<title>term+input: refactor: move theme switching into term_theme_* functions</title>
<updated>2025-06-10T05:11:45Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-06-09T05:37:29Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=33eefa7b45c2d20750f5788dfdcc1008cf33ca47'/>
<id>urn:sha1:33eefa7b45c2d20750f5788dfdcc1008cf33ca47</id>
<content type='text'>
</content>
</entry>
<entry>
<title>render: refactor to allow setting only selection bg or fg</title>
<updated>2025-05-05T11:02:32Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-05-05T10:43:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=073b637d4535cd0dfe92ca1ce954b552ae9f1a4a'/>
<id>urn:sha1:073b637d4535cd0dfe92ca1ce954b552ae9f1a4a</id>
<content type='text'>
Before this, we only applied custom selection colors, if *both* the
selection bg and fg had been set.

Since the options are already split up into two separate options, and
since it makes sense to at least be able to keep the foreground colors
unchanged (i.e. only setting the selection background), let's allow
only having one of the selection colors set.

Closes #1846
</content>
</entry>
<entry>
<title>config: add initial-color-theme=1|2</title>
<updated>2025-04-26T12:43:42Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-04-21T10:19:11Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=bc5b71666867c00e7dc850740bb5cc2a13a9c2a9'/>
<id>urn:sha1:bc5b71666867c00e7dc850740bb5cc2a13a9c2a9</id>
<content type='text'>
This option selects which color theme to use by default. I.e. at
startup, and after a reset.

This is useful with combined theme files, where a single file defines
e.g. both a dark and light version of the theme.
</content>
</entry>
<entry>
<title>csi: implement private mode 2031 (dark/light mode detection)</title>
<updated>2025-04-26T12:23:34Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-04-20T10:48:37Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=10e7f291498a6600cfecc3cde604ea51de5f0f5a'/>
<id>urn:sha1:10e7f291498a6600cfecc3cde604ea51de5f0f5a</id>
<content type='text'>
* Recognize 'CSI ? 996 n', and respond with
  - 'CSI ? 997 ; 1 n' if the primary theme is active
  - 'CSI ? 997 ; 2 n' if the alternative theme is actice
* Implement private mode 2031, where changing the color
  theme (currently only possible via key bindings) causes the terminal
  to send the same CSI sequences as above.

In this context, foot's primary theme is considered dark, and the
alternative theme light (since the default theme is dark).

Closes #2025
</content>
</entry>
<entry>
<title>key-bindings: add bindings to switch between color themes</title>
<updated>2025-04-26T12:20:58Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-04-20T05:58:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=6bc91b5e288ef16613a4e6f9d0a9f6077cedc267'/>
<id>urn:sha1:6bc91b5e288ef16613a4e6f9d0a9f6077cedc267</id>
<content type='text'>
* color-theme-switch-1: select the primary color theme
* color-theme-switch-2: select the alternative color theme
* color-theme-toggle: toggle between the primary and alternative color themes
</content>
</entry>
<entry>
<title>render: gamma-correct blending</title>
<updated>2025-03-05T17:45:01Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-02-21T10:01:29Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=ccf625b9914917e131beb83379c526bab1927edc'/>
<id>urn:sha1:ccf625b9914917e131beb83379c526bab1927edc</id>
<content type='text'>
This implements gamma-correct blending, which mainly affects font
rendering.

The implementation requires compile-time availability of the new
color-management protocol (available in wayland-protocols &gt;= 1.41),
and run-time support for the same in the compositor (specifically, the
EXT_LINEAR TF function and sRGB primaries).

How it works: all colors are decoded from sRGB to linear (using a
lookup table, generated in the exact same way pixman generates it's
internal conversion tables) before being used by pixman. The resulting
image buffer is thus in decoded/linear format. We use the
color-management protocol to inform the compositor of this, by tagging
the wayland surfaces with the 'ext_linear' image attribute.

Sixes: all colors are sRGB internally, and decoded to linear before
being used in any sixels. Thus, the image buffers will contain linear
colors. This is important, since otherwise there would be a
decode/encode penalty every time a sixel is blended to the grid.

Emojis: we require fcft &gt;= 3.2, which adds support for sRGB decoding
color glyphs. Meaning, the emoji pixman surfaces can be blended
directly to the grid, just like sixels.

Gamma-correct blending is enabled by default *when the compositor
supports it*. There's a new option to explicitly enable/disable it:
gamma-correct-blending=no|yes. If set to 'yes', and the compositor
does not implement the required color-management features, warning
logs are emitted.

There's a loss of precision when storing linear pixels in 8-bit
channels. For this reason, this patch also adds supports for 10-bit
surfaces. For now, this is disabled by default since such surfaces
only have 2 bits for alpha. It can be enabled with
tweak.surface-bit-depth=10-bit.

Perhaps, in the future, we can enable it by default if:

* gamma-correct blending is enabled
* the user has not enabled a transparent background
</content>
</entry>
<entry>
<title>terminal: add comment/link to cursor::lcf, to clarify its purpose</title>
<updated>2025-02-18T17:32:54Z</updated>
<author>
<name>Craig Barnes</name>
<email>craigbarnes@protonmail.com</email>
</author>
<published>2025-02-18T17:32:54Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=101bc28698177807e997951d046a12dd2c741848'/>
<id>urn:sha1:101bc28698177807e997951d046a12dd2c741848</id>
<content type='text'>
</content>
</entry>
<entry>
<title>term+vt: refactor: move "utf8" char processing to term_process_and_print_non_ascii()</title>
<updated>2025-02-06T06:45:20Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-01-26T06:33:53Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=d3f692990ef66f550bb3a0ade2e84107cfbeca47'/>
<id>urn:sha1:d3f692990ef66f550bb3a0ade2e84107cfbeca47</id>
<content type='text'>
This function "prints" any non-ascii character (i.e. any character
that ends up in the action_utf8_print() function in vt.c) to the
grid. This includes grapheme cluster processing etc.

action_utf8_print() now simply calls this function.

This allows us to re-use the same functionality from other
places (like the text-sizing protocol).
</content>
</entry>
<entry>
<title>term: insert-mode: handle combining characters correctly</title>
<updated>2025-02-06T06:37:55Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-02-06T06:31:30Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=88dcde3ed8b30c14a5d834d0e88f9b4a5f584939'/>
<id>urn:sha1:88dcde3ed8b30c14a5d834d0e88f9b4a5f584939</id>
<content type='text'>
When the client application emits combining characters, for example
multi-codepoint emojis, in insert-mode, we ended up pushing partial
graphemes to the right, for each codepoint, resulting in too many
cells (and with the wrong content) being inserted.

The fix is fairly simple; don't "insert" when appending characters to
an existing grapheme cluster.

This isn't something we can detect easily in print_insert() (it would
require us to do grapheme clustering again). Fortunately, we do have
the required information in action_utf8_print(). So, pass this
information as a boolean to term_print().

Closes #1947
</content>
</entry>
<entry>
<title>config+url: add support for user-defined regex patterns</title>
<updated>2025-02-05T12:35:17Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-02-03T07:55:47Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=051cd6ecfc8b98e1d80b399ebea40207fe040750'/>
<id>urn:sha1:051cd6ecfc8b98e1d80b399ebea40207fe040750</id>
<content type='text'>
Users can now define their own regex patterns, and use them via key
bindings:

    [regex:foo]
    regex=foo(bar)?
    launch=path-to-script-or-application {match}

    [key-bindings]
    regex-launch=[foo] Control+Shift+q
    regex-copy=[foo] Control+Mod1+Shift+q

That is, add a section called 'regex:', followed by an
identifier. Define a regex and a launcher command line.

Add a key-binding, regex-launch and/or regex-copy (similar to
show-urls-launch and show-urls-copy), and connect them to the regex
with the "[regex-name]" syntax (similar to how the pipe-* bindings
work).
</content>
</entry>
<entry>
<title>render: fix order we're checking custom codepoints</title>
<updated>2025-01-03T06:33:14Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2025-01-03T06:33:14Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=f5c10a245229fe173d58ecdc71e4a917524eaf7b'/>
<id>urn:sha1:f5c10a245229fe173d58ecdc71e4a917524eaf7b</id>
<content type='text'>
Fixes a crash when trying to print a "Legacy Computing"
symbol (U+1FB00-U+1FB9B).

Closes #1901
</content>
</entry>
<entry>
<title>box-drawings: implement octants</title>
<updated>2024-12-08T11:55:57Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-12-08T08:05:41Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=9a1b59adaec22434473789953884c9b6db58e9a5'/>
<id>urn:sha1:9a1b59adaec22434473789953884c9b6db58e9a5</id>
<content type='text'>
</content>
</entry>
<entry>
<title>config: add color.sixelN options</title>
<updated>2024-10-23T06:35:30Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-10-23T06:35:30Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=511aad419b9c869972902fe88b4f593b0faa6719'/>
<id>urn:sha1:511aad419b9c869972902fe88b4f593b0faa6719</id>
<content type='text'>
These options allows you to configure the default sixel color palette.
</content>
</entry>
<entry>
<title>osc: OSC-1 does not set the icon, it sets the icon _label_</title>
<updated>2024-09-13T07:04:18Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-09-13T06:51:12Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=7984f08925e18e24e6b54ac4498d65fa26b2a4d6'/>
<id>urn:sha1:7984f08925e18e24e6b54ac4498d65fa26b2a4d6</id>
<content type='text'>
In fact, there appears there *is* no escape sequence to set the icon.

Keep most of the logic in place, but in practice, we'll always set the
icon to the app-id. That is, at startup, we set it to the configured
app-id (either from config, or the command line).

OSC-176, which sets the app-id, also updates the icon (to the app-id).
</content>
</entry>
<entry>
<title>toplevel-icon: implement OSC-1, CSI 20/21/22/23 t</title>
<updated>2024-09-13T07:04:17Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-09-10T16:53:38Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=97ec375c67cc7b071b0478b6c887057008dc469e'/>
<id>urn:sha1:97ec375c67cc7b071b0478b6c887057008dc469e</id>
<content type='text'>
* The toplevel icon is now set to the app-id, unless "overridden" by
  OSC-1 or OSC-0.
* Implemented OSC-1
* OSC-0 extended to also set the icon
* Implemented CSI 20 t - report window icon
* Implemented CSI 21 t - report window title
* Implemented CSI 22 ; 1 t - push window icon
* Implemented CS 23 ; 1 t - pop window icon
* Extended CSI 22/23 ; 0 t to also push/pop the icon
* Verify app-id set by OSC-176 is valid UTF-8
* Verify icon set by OSC-0/1 is valid UTF-8
</content>
</entry>
<entry>
<title>osc: kitty notifications: cleanup and update to latest version of spec</title>
<updated>2024-08-02T06:07:13Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-08-02T06:07:13Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=ea2f0e7c3f29f2ba83ad71e36c6751bb571f826f'/>
<id>urn:sha1:ea2f0e7c3f29f2ba83ad71e36c6751bb571f826f</id>
<content type='text'>
* Don't store a list of unfinished notifications. Use a single one. If
  the notification ID of the 'current' notification doesn't match the
  previous, unfinished one, the 'current' notification replaces the
  previous one, instead of updating it.

* Update xstrjoin() to take an optional delimiter (for example ','),
  and use that when joining categories and 'alive IDs'.

* Rename ${action-arg} to ${action-argument}

* Update handling of the 'n' parameter (symbolic icon name); the spec
  allows it to be used multiple times, and the terminal is supposed to
  pick the first one it can resolve. Foot can't resolve icons at all,
  neither can 'notify-send' or 'fyi' (which is what foot typically
  executes to display a notification); it's the notification daemon that
  resolves icons.

  The spec _could_ be interpreted to mean the terminal should lookup
  .desktop files, and use the value of the 'Icon' key from the first
  matching .desktop files. But foot doesn't read .desktop files, and I
  don't intend to implement XDG directory scanning and parsing of
  .desktop files just to figure out which icon to use.

  Instead, use a simple heuristics; use the *shortest* symbolic
  names. The idea is pretty simple: plain icon names are typically
  shorter than .desktop file IDs.
</content>
</entry>
<entry>
<title>notify: separate active notifications from unfinished kitty notifications</title>
<updated>2024-07-23T09:53:30Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-07-23T09:53:30Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=b3108e1ad23387327d6cc7ebfdb20307878dd5c3'/>
<id>urn:sha1:b3108e1ad23387327d6cc7ebfdb20307878dd5c3</id>
<content type='text'>
This fixes an issue where it wasn't possible to trigger multiple
notifications with the same kitty notification ID. This is something
that works in kitty, and there's no reason why it shouldn't work.

The issue was that we track stdout, and the notification helper's PID
in the notification struct. Thus, when a notification is being
displayed, we can't re-use the same notification struct instance for
another notification.

This patch fixes this by adding a new notification list,
'active_notifications'. Whenever we detect that we need to track the
helper (notification want's to either focus the window on activation,
or send an event to the application), we add a copy of the
notification to the 'active' list.

The notification can then be removed from the 'kitty' list, allowing
kitty notifications to re-use the same ID over and over again, even if
old notifications are still being displayed.
</content>
</entry>
<entry>
<title>osc: kitty notifications: updated support for icons</title>
<updated>2024-07-23T09:29:05Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-07-23T09:29:05Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=ccb184ae645cd92a6e3aba429ab88a94a09bbf8c'/>
<id>urn:sha1:ccb184ae645cd92a6e3aba429ab88a94a09bbf8c</id>
<content type='text'>
This implements the suggested protocol discussed in
https://github.com/kovidgoyal/kitty/issues/7657.

Icons are handled by loading a cache. Both in-band PNG data, and
symbolic names are allowed.

Applications use a graphical ID to reference the icon both when
loading the cache, and when showing a notification.

* 'g' is the graphical ID
* 'n' is optional, and assigns a symbolic name to the icon
* 'p=icon' - the payload is icon PNG data. It needs to be base64
  encoded, but this is *not* implied. I.e. the application *must* use
  e=1 explicitly.

To load an icon (in-band PNG data):

    printf '\e]99;g=123:p=icon;&lt;base64-encoded-png-data&gt;\e\\'

or (symbolic name)

    printf '\e]99;g=123:n=firefox:p=icon;\e\\'

Of course, we can combine the two, assigning *both* a symbolic
name, *and* PNG data:

    printf '\e]99;g=123:n=firefox:p=icon;&lt;base64-encoded-png&gt;\e\\'

Then, to use the icon in a notification:

    printf '\e]99;g=123;this is a notification\e\\'

Foot also allows a *symbolic* icon to be defined and used at the same
time:

    printf '\e]99;g=123:n=firefox;this is a notification\e\\'

This obviously won't work with PNG data, since it uses the payload
portion of the escape sequence.
</content>
</entry>
<entry>
<title>osc: kitty notifications: implement focus|report</title>
<updated>2024-07-23T05:17:21Z</updated>
<author>
<name>Daniel Eklöf</name>
<email>daniel@ekloef.se</email>
</author>
<published>2024-07-23T04:59:46Z</published>
<link rel='alternate' type='text/html' href='https://git.0x0f.dev/mirrors/foot.git/commit/?id=5905ea0d84530c85899292e38be4cd98156f7cbf'/>
<id>urn:sha1:5905ea0d84530c85899292e38be4cd98156f7cbf</id>
<content type='text'>
This patch adds support for window focusing, and sending events back
to the client application when a notification is closed.

* Refactor notification related configuration options:
    - add desktop-notifications sub-section
    - deprecate 'notify' in favor of 'desktop-notifications.command'
    - deprecate 'notify-focus-inhibit' in favor of
      'desktop-notifications.inhibit-when-focused'
* Refactor: rename 'struct kitty_notification' to 'struct
  notification'
* Pass a 'struct notification' to notify_notify(), instead of many
  arguments.
* notify_notify() now registers a reaper callback. When the notifier
  process has terminated, the notification is considered closed, and we
  either try to focus (activate) the window, or send an event to the
  client application, depending on the notification setting.
* For the window activation, we need an XDG activation token. For now,
  assume *everything* written on stdout is part of the token.
* Refactor: remove much of the warnings from OSC-99; we don't
  typically log anything when an OSC/CSI has invalid values.
* Add icon support to OSC-99. This isn't part of the upstream
  spec. Foot's implementation:
    - uses the 'I' parameter
    - the value is expected to be a symbolic icon name
    - a quick check for absolute paths is done, and such icon requests
      are ignored.
* Added ${icon} to the 'desktop-notifications.command' template. Uses
  the icon specified in the notification, or ${app-id} if not set.
</content>
</entry>
</feed>
